How to Avoid Rollover Accident During Construction of Excavator?

Rollover is one of the common accidents during the construction of excavators. Due to the light and narrow body of the excavator, it is more prone to rollover than large excavators, so how to avoid sideways during construction of small excavators What about it? As a Komatsu Bucket Teeth Wholesale, share with you. The small excavator rollover mainly has the following three points:

Komatsu Bucket Adapters

First: Due to the off-road nature of the excavator, through the cooperation of the track and the working device, the excavator can climb steep slopes and can easily go downhill. Everyone can easily ignore the dangerous situation. When the excavator goes downhill or along a trailer. Many drivers will push the front windshield or door frame with their left hand, and the excavator with their right hand. Walk. At this time, if the door is open instead of locked, the door will quickly close due to gravity, which is usually very Great power. The hand held on the door frame will be pinched. Very serious consequences.

Therefore, when the excavator is working, there is a lock on the door of the excavator. When it is opened, there is a lock. Whether the door is open or closed, it must be locked. The driver should try not to grasp the door frame.

Second: When you walk, you can hold the boom. There are many novices or apprentices who think that the boom of the excavator is mentioned, the pole is fully opened, and the bucket is facing the sky, so the sight will be better when walking If you walk, it will be cool. This way is very dangerous. Due to the high working device and high center of gravity, if there is a little unevenness, the ground will fall over.

Therefore, don't be calm when walking and doing homework. The important thing is to be optimistic about the road under your feet.

Third: Drive on soft soil. When the excavator is working on soft soil such as swamps, river beaches, etc., first test whether the ground can bear the weight of the excavator with a bucket. If you forget this process, unless you are driving Amphibious excavator, otherwise serious consequences may occur. Although the excavator is designed for a crawler excavator and has a large contact area with the ground, the excavator has accidents in the soil in accidents! If you are trapped while working on soft soil such as a river beach, please pay attention to the following:

1. Try with a bucket first.

2. Don't stay in one place for a long time.

3. Take more straight paths and turn less.

Our company and Komatsu Bucket Adapters are on sale, please contact us.