Where should I Check after the Excavator Finishes Construction?

As an Excavator Spare Parts Wholesale, share with you.

After a long day of fatigue, I am ready to close the work, but the completion of the construction does not mean that there is nothing left. In order to ensure that the small excavator can operate normally next time, it is necessary to check the following places for abnormalities before closing.

Bucket Adapters

1. How much fuel is left in the fuel tank and whether there is any looseness in the oil pipe joints.

2. Whether the hydraulic oil in the hydraulic system meets the standards and whether the oil pollution is serious.

3. Whether the battery can be charged normally, whether the diesel engine start circuit connector is loose, and check whether the lighting equipment is normal.

4. Is there sufficient oil in the oil pan? Is there any oil leakage at the oil pipe connection?

5. Is the water in the engine cooling system sufficient?

6. Whether the transmission has enough lubricant.

7. Whether the connecting part of each component is loose.

8. If it has not been started for a long time, when it is restarted, check whether the lubricant of each component has deteriorated. If it is deteriorated, replace all the lubricant with new ones. Our company has Loader Bucket Teeth for sale.

These inspection items seem complicated and troublesome. In fact, they can be inspected in less than a few minutes. Developing good habits is not only responsible for small excavators, but also for yourself.

What should I do if the oil in the excavator is filled with water?

Four methods of judging the water ingress of small excavator oil. 1. Observe the appearance of the excavator oil. It is easy to tell whether the oil contains moisture by color. Water-free oils are translucent and oily, while water-containing oils appear opaque brown or earthy yellow. 2. Check if the oil in the coolant of the excavator contains oil. If certain parts of the engine are damaged, engine coolant will enter the lubrication system and oil will mix together. Infiltrated oil can also be found in the tank coolant and can be easily identified. 3. If the engine oil enters the water, it will chemically react with the coolant in a high temperature environment to form an emulsion. Checking the dipstick will show a white with foam. 4. When the oil of the excavator contains a large amount of water, the oil level of the oil will rise. At this point, we can simply judge the level of the oil level. The above is the method of judging the water ingress of the excavator oil. I hope it will help you.

Our company also has Bucket Adapters on sale, welcome to consult.