Do you know the Common Sense of Safe Driving of Excavator?

As a Caterpillar Bucket Adapters Factory, share with you. Excavator operation functions can be divided into eight categories: excavation operations, loading operations, leveling operations, trenching operations, crushing operations, grabbing operations, pipe lifting operations, demolition operations.

Precautions for the correct operation of the excavator:

1. When rotating, be aware of the surrounding obstacles and terrain, and operate safely. Check the forward and backward directions of the track to avoid tipping or impact.

2. Try not to face the final drive in the direction of digging during digging, otherwise the walking motor or hose will be easily damaged. Ensure that the left and right tracks of the small excavator completely contact the ground, and improve the stability of the whole machine.

3. When digging with a stick, ensure that the angle of the stick is in the range of 45 ° from the front to 30 ° at the rear. Using boom and bucket at the same time can improve the efficiency of digging.

4. The small excavator should be parked horizontally and stably, otherwise it will be difficult to accurately control the unloading of the slewing, which will prolong the cycle time. Keep a proper distance between the car body and the truck to prevent the rear of the car body from colliding with the truck when doing 180 ° rotation.

Caterpillar Bucket Rippers

5. Load the soil as far as possible left, so that the field of vision is wide and the operation efficiency is high; correctly grasp the rotation angle to reduce the time for turning. Caterpillar Bucket Adapters are on sale in our company.

6. The truck position is lower than the small excavator, which can shorten the boom lifting time, and the sight is good. Load sand, crushed stones first, and then place large stones to reduce the impact on the carriage.

7. When using an excavator for lifting operations, confirm the surrounding conditions of the lifting site, use high-strength hooks and wire ropes (select products that meet national testing standards), and use special lifting devices as much as possible when lifting. The movement should be slow and stable, and the length of the hoisting rope should be appropriate. Excessively long movement of the hoisting rope will cause large swings and difficult to control accurately.

8. Correctly adjust the position of the bucket to prevent the wire rope from slipping off and the lifting object falling off. Personnel should try not to approach the lifting object to prevent danger due to improper operation.

9. The stability of the excavator can not only improve the work efficiency and prolong the life of the machine, but also ensure the safety of operation (place the machine on a flat and solid ground).

10. The driving wheel has good stability on the rear side and can prevent the final transmission from being damaged by external force. The distance A of the track of the small excavator on the ground is always greater than the distance B, so the forward stability of the work is good, and side operations are avoided as much as possible.

11. When the track sinks deep in the mud, place a wooden board (or hard object) under the bucket, use the bottom end of the bucket to support the track, and then place a wooden board (or hard object) under the track and drive it out.

Our company also has Caterpillar Bucket Rippers on sale, welcome to consult.