Excavator daily maintenance points

As a Loader Bucket Teeth Exporter, share it with everyone. The working device is the main component of excavator. At present, excavator is equipped with a backhoe working device, which is mainly used to excavate soil below the stopping surface, but it can also excavate soil below the maximum cutting height. In addition to digging, trenching, and loading You can also perform simple leveling work outside. The excavation operation is suitable for excavating grade Ⅰ ~ Ⅳ soil. Hydraulic hammer or blasting method is required for grade Ⅴ and above.

The backhoe working device consists of the main parts of the boom, Bucket Teeth, bucket, rocker, connecting rod, and hydraulic lines of the working device including the boom cylinder, arm cylinder, and bucket cylinder.

Volvo V60 Side Cutter

First, to check, clean or replace the air filter element, clean the cooling system, check and tighten the track shoe bolts, check and adjust the back tension of the track, check the excavator intake heater, replace the teeth, and adjust the excavator bucket clearance. Check the front window cleaning liquid level, check and adjust the excavator air conditioner, clean the floor in the cab, and replace the crusher filter (optional accessory).

When cleaning the inside of the cooling system, slowly loosen the water injection port cover after the engine has fully cooled down to release the internal pressure of the water tank before water can be discharged. Do not perform cleaning work while the engine is running. Fans rotating at high speed may cause danger. When cleaning or changing the coolant, park the machine on a level surface.

Second, start the inspection project.

Inspection items before starting the engine: check the height of the liquid level of the excavator coolant (filled with water), the oil level of the excavator engine (filled with oil), the excavator fuel level (filled with fuel), the hydraulic oil level (filled with hydraulic oil), air Whether the filter element is clogged, the wires, the horn is normal, the lubrication of the bucket, water and sediment in the oil-water separator.

Third, checkpoints daily.

In order to check the oil, water and hydraulic oil every day, and to give grease, check the air filter one week. If it is dusty, check it in two days, change the oil every two months, and change the hydraulic oil one or two. Once every year, it depends on the workload of your excavator. Normally, it takes two years, and two shifts a year.

Fourth, daily precautions.

Pay attention to waterproofing, do not work in deep water, and do not directly rinse electrical components with water when cleaning. Do not store sundries in the battery box, especially metal tools, etc., which may cause fire. Do not replace the insurance with iron copper wire or replace it with a substandard insurance. When the excavator is parked for a long time, the battery line should be disassembled to prevent feeding.

Check the pin bolts every day for looseness, looseness, and missing, and tighten them in time. Check the structure for cracks and deformation every day. Pay attention to the surrounding environment when parking the excavator, and park it on solid, stable, and hard ground. Do not stop by the river, cliff, or hillside to prevent accidents. When parked, the bucket cylinder is fully retracted, and the bucket falls to the ground to prevent the cylinder from being hit.

Our company also has Volvo V60 Side Cutter on sale, welcome to consult.