What should I Pay Attention to when the Excavator Works on Muddy or Soft Ground?

As a Caterpillar Bucket Teeth Manufacturer, share with you.

(1) If the bed is flat and the water flow is slow, the working depth in the water must be lower than the centerline of the supporting sprocket.

(2) When working on soft ground, the ground may fall little by little. Please pay attention to the condition of the lower body when working.

(3) When working on soft ground, please be careful not to exceed the depth of the machine groove.

(4) When the single-sided track shoe sinks into the mud, use a boom, stick or bucket to lift the track shoe, then pad the wood or logs, and then turn off the machine. If necessary, place the board under the bucket. When lifting the machine on the machine, the angle between the boom and the arm should be 90 ° -110 ° and the bottom of the bucket should always be in contact with the muddy ground.

(5) If you want to immerse the guide rails on both sides in muddy water, please place the plate according to the above instructions, slide the bucket off the ground (insert the bucket teeth into the ground), and then pull the bucket backward to pull out the excavator. Move it before pulling it out. Our company also has Caterpillar Bucket Adapters for sale, please contact us.

Caterpillar Bucket Teeth

Four methods for judging the oil intake of excavator.

1. Observe the appearance of the excavator oil. It is easy to judge whether the oil contains water by color. Oil without water is translucent oily, while oil with water is opaque brown or earthy yellow.

2. Check whether the oil in the excavator coolant contains oil. If some parts of the engine are damaged, the engine coolant will enter the lubrication system and the oil will mix together. Permeated oil can also be found in the tank coolant and can be easily identified.

3. If the engine oil enters the water, it will chemically react with the coolant in a high-temperature environment to form an emulsion. Checking the dipstick will show white with foam.

4. When the oil of the excavator contains a lot of water, the oil level of the oil will rise. At this point, we can simply judge the level of the oil level.

The above is the method of judging the oil inflow of the excavator. I hope it will help you.

How to reduce unnecessary power loss of excavator?

1. Accurately apply and protect the exhaust pipe and muffler. Including frequent removal of coke in the muffler, timely repair of the damaged muffler, no need to install the exhaust pipe forward, no need to make extra fineness and longer exhaust pipe.

2. Keep the walking system of the small excavator in good condition.

Our company also has Caterpillar Bucket Teeth on sale, please contact us.