What are the Precautions for the Construction of Small Excavators?

As a Caterpillar Bucket Teeth Manufacturer, share it with you.

Small excavators should be parked on a solid, flat ground when they are working. The outriggers should be set up on small tires. If the weather is very cold and the downtime of the small excavators is very long, please drain the engine coolant cleanly.

The wheelbase of the track of a small excavator on the ground is always greater than the wheelbase, so the forward working stability is good, and lateral operation should be avoided as much as possible; the digging point should be kept close to the machine to improve stability; if the digging point is far away from the machine, it will cause Because the center of gravity moves forward, the operation is unstable; lateral digging is less stable than forward digging. If the digging point is far from the center of the machine body, the machine will be more unstable. Therefore, the digging point and the center of the machine body should be kept at a proper distance to balance the operation. 

Caterpillar Bucket Teeth Manufacturer

During the dragging operation of a small excavator, when the shovel is full, do not continue to shovel to prevent overloading. When dragging trenches, ditches, foundation pits, etc., you should consult with the construction personnel according to the depth, soil quality, slope and other conditions to determine the distance between the machine and the excavated slope.

Using a small excavator bucket to dig rocks will cause greater damage to the machine and should be avoided; when digging is necessary, the position of the machine body should be adjusted according to the direction of the cracks of the rock, so that the bucket can be shoveled in smoothly for excavation; Insert into the rock cracks, use the digging force of the stick and bucket to excavate (pay attention to the slippage of the bucket teeth); the rock that is not broken should be broken first and then the bucket should be used for excavation.