What are the Precautions During the Transportation of the Excavator?

As a Bucket Tooth Wholesale, share with you. When the excavator needs to be transferred, we need to transport the mini excavator to the destination. The crawler excavator is not a machine that can walk on the road for a long time because it will cause damage to the machine. Therefore, it is necessary to hoist and load the truck to the destination during transportation, but there are many things we need to pay attention to during these processes, so we need to pay extra attention.

Caterpillar Bucket Teeth

Before the excavator needs to be transported, we must first hoist the excavator for loading. During the hoisting process, no one on the excavator must ensure that the steel rope we hoist can withstand the weight of the excavator and is stable during the hoisting process. Once the center of the excavator is unstable, it will rotate during the lifting process. During the lifting process, the engine is started to rotate the upper part of the slewing body. At this time, the tooling device of the excavator will be put on the ground on the front and rear axles of the excavator.

The excavator is loaded. In the process of loading, first park the excavator to the designated position and then drop the bulldozer, turn off the engine, pull out the key, and let the bucket and bean-dried cylinder all extend out and lower the boom. Maintain the stability of the excavator and will not roll over during transportation. When loading and transporting, pay attention to placing square logs in the bucket and cylinder to avoid damage to the car body during transportation.

When the excavator is transported to the destination, the truck needs to be unloaded. When unloading the truck, we should be extra careful to operate the generator of the excavator at a low speed and walk slowly. Keep the trailer and the excavator at a certain distance with the help of a slope or platform. Load and unload the excavator, do not change direction during unloading. If you want to change the direction, you must correct the direction when you go down the ramp. Such prudent operation is to ensure the personal safety of our operators from damage to the mini excavator.

The above is a summary of the excavator-related loading crane and the precautions when unloading the truck. I hope it will be helpful to everyone.

Our company also has Caterpillar Bucket Teeth on sale, welcome to contact us.