Excavator Bucket Teeth Manufacturer Tell You About the Manufacturing Process of Bucket Teeth

As a professional manufacturer of Ground Engaging Tools (G.E.T) and wear products, Yongfeng will introduce it to you.

The bucket tooth of an excavator is an important consumable part of an excavator, just like a human tooth. It is a bucket tooth formed by the combination of a tooth tip and a tooth seat, and the two are connected by a pin.

The casting process and flow of a part are very important, and it is related to whether the quality of the entire mechanical equipment meets the standard. Then let's talk about the technological process of excavator bucket teeth now.

                                            Forged Teeth

The technological process of excavator bucket teeth: sand casting, forging die casting and precision casting. The cost of precision casting is moderate, but the requirements for raw materials are very strict, and the level of craftsmanship is relatively high. Due to the ingredients, the wear resistance and quality of some precision cast bucket teeth far exceed that of forging and die casting bucket teeth. This is the main manufacturing process currently on the market. The cost of forging and die casting is high, and the craftsmanship and the quality of the excavator teeth produced are also good. The cost of sand casting is low, and the level of craftsmanship and quality are not as good as the other two technological processes.

Manufacturing Process of Bucket Teeth

Forged Bucket Teeth

Forged bucket teeth are generally made of alloy steel, and then a forging machine is used to apply pressure to the special metal billet, and then extruded at high temperature to refine the crystal material in the forging to produce plastic deformation to obtain certain mechanical properties. After forging, the metal can improve its structure, which can ensure that the forged bucket teeth have good mechanical properties, are more wear-resistant, and have a longer service life.

Casting Bucket Teeth

The casting bucket teeth are generally made of austenitic ductile iron, and then the liquid metal is poured into a casting cavity suitable for the shape of the part. After it is cooled and solidified, the part or blank is obtained. This process can provide good wear resistance and penetration.

In general, due to the material structure of the cast tooth, its wear resistance, toughness and penetration are not as good as the forged tooth, but it can provide lighter weight, better hardness and cheaper price.

Yongfeng has the bucket teeth, adapters, side cutters, cutting blades, bucket protectors and fasteners for a range of different earthmoving equipments and applications for sale, welcome to consult!